The Optima B210 is an ultra-compact high power bass enclosure designed to operate over the 55 – 200 Hz pass band. The enclosure’s primary function is as the bass element of an Optima 5 array for applications such as the Audio Visual and theatre markets. The Optima B210 can also be combined with the Axis AX8. Integrated flyware enables the Optima B210 to be either flown above Optima 5 array or used as the basis of a groundstack. The Optima 5 Crossbow frame can be used with the Optima B210 either as a fly-frame with shackle or truss clamp fixing options or inserted between Optima 5 to allow downward kelp in groundstack mode, a useful feature in theatre applications. Additionally the enclosure can be stand mounted using the Crossbow frame, or linked via the flyware and flown in a column array.

The cabinet combines two off 10” long excursion cone drivers with neodymium magnet structures loaded into a twin chamber band pass structure. The enclosure is manufactured from 15mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. The enclosure has an integrated three point fly system that allows connection box to box, box to Optima 5 or box to fly frame. Each cabinet has a pair of side panel mounted steel bar handles. The cabinet base has rubber feet and the cabinet top panel housings to aid cabinets when stacked in vertical columns. The top panel contains an M20 plate to allow Optima 5 or Axis AX8 cabinets to be pole mounted above it.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors on the rear. The connection panel also has a switch to allow selection of 1+/- input for integration with Optima 5 or 2+/- input for integration with Axis AX8. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 networked system management which provides DSP preset functions and full networked software control of operating parameters. Two Optima B210 cabinets can be powered per Q5 channel.


More information...

The Optima B215 is a compact high power bass enclosure designed to operate over the 40 - 135 Hz pass band. Its primary function is as the bass element of an Optima 8 and Optima 5 array system. In portrait mode it can form the basis of an Optima 5 ground stack system or alternatively it can be flown above an Optima 5 array. In landscape mode it performs the same function for Optima 8.

The cabinet combines two off 15" long excursion cone drivers with neodymium magnet structures loaded into a twin chamber band pass structure. The enclosure is manufactured from 18 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. The enclosure has a modular dual mode four point fly system that allows connection box to box or box to fly or groundstack frames. Each cabinet has five handles, a clip on transit dolly or the option of castors mounted directly to the rear panel. The cabinet base has polyethylene runners and the cabinet top panel housings to aid cabinets when stacked in vertical columns. The fly system also incorporates rubber feet and housings to provide location when stacked in the portrait mode. The top panel contains an M20 plate to allow cabinets from other Inspired Audio ranges to be pole mounted above it. Three cabinets in a vertical stack have the option of being used in a cardioid mode with the bottom cabinet inverted

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP Connectors on the rear and an additional connection on the front grill for use in cardioid mode. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 networked system management which provides DSP preset functions and full networked software control of operating parameters. One Optima B215 can be powered per bridged pair of output channels.


More information...

The reFlex B210 is an ultra-compact high power bass enclosure designed to operate over the 55 – 200 Hz pass band. The enclosure’s applications include use as the bass element of an Axis AX8 system or other products from the Axis, mFlex MQ, or mFlex M ranges. Alternatively the product is ideal for fixed installation where its compact dimensions enable it to be discreetly installed.

The cabinet combines two off 10” long excursion cone drivers with neodymium magnet structures loaded into a twin chamber band pass structure. The enclosure is manufactured from 15mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. Each cabinet has a pair of side panel mounted steel bar handles. The cabinet base has polyethylene runners and the cabinet top panel housings to aid cabinets when stacked in vertical columns. The top panel contains an M20 plate to allow cabinets to be pole mounted above it.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors on the rear. The connection panel also has a switch to allow selection of 1+/- input for systems where the product requires a direct amplifier feed or 2+/- input for integration with products such as the Axis AX8. In this mode it enables a bi-amp system to be driven from a single Speakon 4 cable. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 or D2.5 networked system management which provides DSP preset functions and full networked software control of operating parameters. Two reFlex B210 cabinets can be powered per Q5 or D2.5 channel.

The reFlex B215 is a compact high power bass enclosure designed to operate over the 40 – 135 Hz pass band. The reFlex B215 is a variant of the Optima B215 based on a shared enclosure but without the fly track system giving it identical acoustic performance. It has applications within both touring where it might be the bass companion to the Optima 5 array or products from the mFlex and Axis ranges. The reFlex B215 also has applications within fixed installation where it can be combined with products from the Optima, mFlex or Axis ranges.

The cabinet combines two off 15” long excursion cone drivers with neodymium magnet structures loaded into a twin chamber band pass structure. The enclosure is manufactured from 18 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. Each cabinet has four handles and the option of rear panel mounted castors. The cabinet base has polyethylene runners and the cabinet top panel housings to aid cabinets when stacked in vertical columns. The top panel contains an M20 plate to allow cabinets to be pole mounted above it. Three cabinets in a vertical stack have the option of being used in a cardioid mode with the bottom cabinet inverted.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors on the rear and an additional connection on the front grill for use in cardioid mode. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 networked system management which provides DSP preset functions and full networked software control of operating parameters. One reFlex B215 can be powered per bridged pair of output channels.

The reFlex B215 can optionally be upgraded to Optima specification with the addition of the modular fly track system.

The reFlex SB118 is a compact high power sub bass enclosure designed to operate over the 40 - 95 Hz pass band. The reFlex SB118 has a wide range of applications within both touring and fixed installation. It may be combined with mFlex range products or used as part of an Optima 5 system where ground stacked sub is required. The reFlex SB118 shares its physical dimensions with the reFlex B215 which makes combining them within an integrated stack a possibility.

The cabinet houses a single 18" long excursion cone driver with neodymium magnet structure which is loaded into a twin chamber band pass structure. The enclosure is manufactured from 18 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. Each cabinet has four handles and the option of rear panel mounted castors. The cabinet base has polyethylene runners and the cabinet top panel housings to aid cabinets when stacked in vertical columns. The top panel contains an M20 plate to allow cabinets to be pole mounted above it. Three cabinets in a vertical stack have the option of being used in a cardioid mode with the bottom cabinet inverted.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP Connectors on the rear and an additional connection on the front grill for use in cardioid mode. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 networked system management which provides DSP preset functions and full networked software control of operating parameters. Two reFlex SB118 cabinets can be powered by a bridged pair of output channels.

The reFlex SB118 can optionally be upgraded to Optima specification with the addition of the modular fly track system.


More information...

The reFlex SB218 is a high power sub bass enclosure designed to operate over the 40 - 95 Hz pass band. Its primary function is as the sub bass element of Optima array systems where the requirement is for a ground stacked system. It shares it’s enclosure with the Optima SB218 and has identical acoustic performance. Additionally the reFlex SB218 can be used within fixed installation as the companion to Optima products or combined with mFlex range products.

The cabinet combines two off 18" long excursion sub bass cone drivers with neodymium magnet structures loaded into a twin chamber band pass structure. The enclosure is manufactured from 18 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. Each cabinet has four handles and the option of castors mounted directly to the rear panel. The cabinet base has polyethylene runners and the cabinet top panel housings to aid cabinets when stacked in vertical columns. It has additional housings to permit Optima B215 or reFlex B215 cabinets to be stacked above it. Three cabinets in a vertical stack have the option of being used in a cardioid mode with the bottom cabinet being inverted.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP Connectors on the rear and an additional connection on the front grill for use in cardioid mode. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 networked system management which provides DSP preset functions and full networked software control of operating parameters. One reFlex SB218 can be powered per bridged pair of output channels.

The reFlex SB218 can be upgraded to Optima specification with the addition of the modular fly track system.


More information...

The reFlex B215 is a compact high power bass enclosure designed to operate over the 40 - 135 Hz pass band. The reFlex B215 is a variant of the Optima B215 based on a shared enclosure but without the fly track system giving it identical acoustic performance. It has applications within both touring where it might be the companion to products from the mFlex range or fixed installations where it might be used as part of an Optima 8 or Optima 5 installed system or combined with other Inspired Audio products.

The cabinet combines two off 15" long excursion cone drivers with neodymium magnet structures loaded into a twin chamber band pass structure. The enclosure is manufactured from 18 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. Each cabinet has four handles and the option of rear panel mounted castors. The cabinet base has polyethylene runners and the cabinet top panel housings to aid cabinets when stacked in vertical columns. The top panel contains an M20 plate to allow cabinets to be pole mounted above it. Three cabinets in a vertical stack have the option of being used in a cardioid mode with the bottom cabinet inverted.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP Connectors on the rear and an additional connection on the front grill for use in cardioid mode. The cabinet is designed to be powered by Inspired Audio’s eFlex Q5 networked system management which provides DSP preset functions and full networked software control of operating parameters. One reFlex B215 can be powered per bridged pair of output channels.

The reFlex B215 can optionally be upgraded to Optima specification with the addition of the modular fly track system.


More information...